|
| Comparison of Intralase FS60 and Ziemer FEMTO LDV femtosecond laser for flap creation |
|
作者：张晶 文章来源：首都医科大学附属北京同仁医院 点击数：228 更新时间：2012/9/13 
|
|
PURPOSE: To assess and compare the dimensions of laser in situ keratomileusis (LASIK) flaps created by the Intralase femtosecond laser (Intralase group) and the Ziemer FEMTO LDV femtosecond laser (Ziemer group) by Fourier-domain optical coherence tomography (OCT).
METHODS: RTVue OCT was used to measure the morphology of 816 LASIK flaps of 408 consecutive patients created with the Intralase (408 flaps) or the Ziemer (408 flaps) at one week postoperatively. Nominal flap thickness was 110μm for all patients and for both devices. Flap thickness was measured on 18 specified points on each flap to analyze the regularity, uniformity and accuracy of the two types of LASIK flaps.
RESULTS: The means of the central flap thickness made by Intralase group and Ziemer group were 109.34±7.57µm and 103.91±6.07µm（P<0.001）. The mean flap thickness in the Ziemer group (105.37±4.56µm) was significantly thinner than that in the Intralase group (110.29±6.95µm) (P<0.001). Corneal flaps both in the Intralase group and Ziemer group were uniform and regular, showing an almost-planar configuration. Intralase group and Ziemer group had similar predictability, and the average deviation of flap thickness was 6.59µm in the Intralase group and 6.56µm in the Ziemer group (P=0.877). The maximum deviation from the intended 110µm of 18 measurements was 8µm in the Intralase group, while the Ziemer group was 9µm.
CONCLUSIONS: The flaps made by Intralase femtosecond laser are thicker than those created by Ziemer femtosecond laser. Intralase group and Ziemer group had similar predictability and uniformity on flap creation. |
|
|
| 会议投稿录入：毛进 责任编辑：毛进 |
|
|
上一篇会议投稿： 激光周边虹膜切除术后房角形态的远期评价
下一篇会议投稿： 散瞳前后角膜屈光力变化的观察 |
|
|
| 【字体：小 大】【发表评论】【加入收藏】【告诉好友】【打印此文】【关闭窗口】 |
|
网友评论：（只显示最新10条。评论内容只代表网友观点，与本站立场无关！）